VTS0234-47/AP025

Product Details

Product Description

Product Description
Brand:Rexroth
Type:VTS0234-47/AP025
Origin: the United States
Warranty: 365 days
Colour: new/used
Shipping method: Courier delivery
Module of PLC, DCS, ESD system card, the card is a vibration monitoring system, steam turbine control system module, the advantages of the gas generator spare parts brand: Allen Bradley, BentlyNevada, ABB, Emerson Ovation, Honeywell DCS, Rockwell ICS Triplex, FOXBORO, Schneider PLC, GE Fanuc, Motorola, HIMA, TRICONEX, Prosoft etc. Various kinds of imported industrial parts of our products are widely used in metallurgy, petroleum, glass, aluminum manufacturing, petrochemical industry, coal mine, papermaking, printing, textile printing and dyeing, mechanical, electronic manufacturing, automobile manufacturing, plastic machinery, electric power, water conservancy, water treatment/environmental protection, boiler heating, energy, power transmission and distribution and so on.
S2XX50 AC LINE VOLTAGE DOUBLING DRIVE POWER SPECIFICATIONS 120 VAC Voltage Doubling S20350 S20250 Peak Output Current (ARMS) 0 to 40ºC Ambient 9.0 4.5 Minimum Peak Current TimeStarting from 0 Amps 3.0 3.0 Cont. Output Current (ARMS) 0 to 40ºC Ambient 3.0 1.5 Continuous Output Power (Watts) 750 350 Peak Output Power (Watts) 2400 1200 RMS Line Current at Continuous Output Power (RMS) 10 5 Fusing – Line Inputs MDA-15 MDA-10 WARNING S200 units with the voltage doubling option manufactured before June 2004 have the function of L1 and L3 reversed. Using 240 VAC on old voltage doubled units with this new documentation will lead to catastrophic failure of the drive. Requirements for Safe Operation of the Drive It is the machine builder’s responsibility.
CONFORMANCE REQUIREMENTS The equipment described herein has been developed, produced, tested and documented in accordance with the corresponding standards. During use conforming with requirements, the equipment is not dangerous for people or equipment. Use conforming with requirements means that the safety recommendations and warnings detailed in this manual are complied with and that the applicable regulations for safety (machine directives, etc.) and noise suppression (EMC Directives) are observed while operating the drive. At the end of its lifetime, dispose of or recycle the drive according to the regulations applicable at that time. G.2 CE APPROVAL The CE initials confirm that the S200 drives satisfy all requirements of CE Directives. However, the equipment is not ready to operate without additional installations (cable, motor, etc.). Thus, all necessary tests and measurements had to be made on a typical installation. The test installation with all peripheral devices, as well as the test results and measurements are recorded in detail in documentation that is available from the manufacturer on request. G.2 CE EMC COMPLIANCE NOTE If the connection method on your machine is different from the ones pictured in this manual, or in the event of use of components other than those specified, adherence to CE interference limit values cannot be guaranteed. The machine builder should incorporate good EMC installation and wiring practices in the machine design. Some machine designs require more EMC consideration than others. For example, a multiaxis machine generates more noise than a single-axis machine. Therefore, multi-axis machines may require additional noise reduction techniques, such as a metal enclosure or clamping of cables shields to an RF ground.