Agricultural Spare Parts 536 Housing of Gearbox

Product Description

Agricultural spare parts 536 Housing Of Gearbox Product Description


Characteristic

If you are looking for the parts guide of the gearbox, you have come to the right place. Here, you can learn about the different components that make up the transmission housing and their working principles. This paper introduces mechanical seal, oil seal, radial lip seal and shell itself. Read on to learn more about the important components of the transmission. In addition, you will learn how to correctly install the new housing of the transmission.
Gearbox housing parts
The gearbox shell is the shell surrounding the internal gearbox components, providing mechanical support and physical protection. The components of the housing are surrounded by metal plates called snap rings, which are usually printed with the logo of superior gearbox company. The housing consists of two main parts - the lower part connects the gearbox to the structure and holds the lubricating oil. The upper part completes the housing and provides mechanical integrity. The two parts of the shell are connected with each other by mating surfaces.
The housing is also made of plastic and consists of two parts - the bearing that forms part 3 and the housing part 4. The bearing component 3 is formed by two plates with a basic U-shaped cross-section. Housing assembly 4 consists of two bearing plates, which are shaped like u. The housing plate is connected to the spindle nut by two slots extending from the housing assembly.
mechanical seal
Cat heavy-duty double-sided seals and duo cone seals combine to provide superior performance and long life in demanding applications. They have unique load rings that compensate for operating and manufacturing variables. This design allows oil and grease to be used as lubricants without regular lubrication. Cat duo cone seals are available in various sizes. Cat duo cone seals come in several different materials and can be used in a variety of applications. Mechanical seal is a kind of bearing with rotating part and fixed part. Both seals are made of rubber or plastic materials and are used to contain liquids. In addition, the seals are lubricated by pumping liquid or blocking liquid. It is a kind of wear-resistant bearing that can withstand high pressure.
oil seal
The 536 housing of the gearbox has several seals that need to be replaced from time to time. The most common type of oil seal is radial lip seal. It is composed of a metal shell and an elastic sealing lip. The metal shell is installed in the hole of the shell, and the elastic sealing lip is pressed on the shaft. When the gearbox is submerged in water, these seals may not prevent water from entering. A properly installed oil seal on the gearbox 536 housing will prevent leakage and ensure smooth operation of the transmission. The new rubber toric on the gearbox 536 housing will not affect vehicle performance. The oil seal on the transmission is very important in the transmission. If there is a fault, you will notice that the drive shaft rotates unevenly. this
The transmission output shaft may be damp, which will cause oil to drip from the shaft. If the oil is not dry, the seal will tilt up
happen
Radial lip seal
A radial lip seal on the 536 housing of the gearbox 222 is arranged between the annular element 218 and the inner circumference of the shift cylinders 200 and 202. This seal is integrally connected to the housing. In one embodiment, the radial lip seal is integrally connected to the gearbox by forming a locking connector. However, such seals are not required.
In some embodiments, the input seal 348 is adjacent to the smoothing portion 348. The latter has a larger diameter than the smooth portion 1114. Therefore, without the sleeve, the seal will mesh with the smooth outer surface of the motor shaft and be damaged by the teeth. There can be one or two input seals. Preferred embodiments include an input seal 348 with a diameter smaller than a smooth surface.
Split shell
The split housing of the 536 transmission is similar to the walnut housing. It consists of two parts - the lower part connects the gearbox to the structure, provides structural support, and contains lubricating oil. Upper finished housing, supplied
Mechanical integrity. Both parts have mating surfaces to prevent oil leakage and shell fatigue. In order to prevent the upper and lower parts from separating from each other, the split shell is usually divided into two halves.
This design reflects the appearance of split transmission in automobile design. It is similar to the excellent transmission design. Split transmission is sold to automobile manufacturers as a superior substitute. Its sales and marketing department is very similar to superior. The marketing and sales methods of split transmission are similar. Gearbox is the second best-selling product of its kind. Its sales supervisor is very similar to the superior sales supervisor.

Company Information